How to know when your air compressor needs service?
Decrease in pressure and flow: If you find that your air compressor’s output pressure or flow rate has dropped significantly, this may be one of the signs that the equipment needs overhaul. You can tell by comparing the actual output with the rated value.
Unusual noise or vibration: If your air compressor is making unusual noise or vibration, it may indicate a problem within the unit and that it needs to be serviced.
Lubricating oil analysis: Regular analysis of lubricating oil can help you understand the wear and tear inside the equipment. If abnormal metal particles or oil deterioration are found, overhaul may need to be considered.
Air leakage: If the air compressor is found to have obvious air leakage, it needs to be repaired in time to avoid affecting the normal operation of the equipment.
Abnormal temperature: If the operating temperature of the air compressor rises abnormally, it may indicate a problem within the equipment that requires maintenance.
What should you pay attention to when overhauling an air compressor?
Safety: Ensure safe operating procedures are followed during repairs, including cutting off power, relieving pressure, wearing personal protective equipment, etc.
Inspection: Conduct a comprehensive inspection of all components of the compressor, including filters, valves, seals, lubrication systems, etc., to ensure that there are no damaged or severely worn components.
Cleaning: Clean the inside and outside of the compressor to remove accumulated dirt and oil and keep the equipment in a clean condition.
Replace parts: According to the inspection results, replace damaged or aging parts in time to ensure the normal operation of the equipment.
Lubrication: Inspect and maintain the lubrication system to ensure that all lubrication points are fully lubricated to reduce wear and friction.
Debugging: After the overhaul is completed, carry out debugging and trial operation of the equipment to ensure that the equipment can work normally.
