We are pleased to announce that Nanxiang Air Compressor will join the Canton Fair from October 15 – 19 , 2025, in Guangzhou, China!
Date: October 15 – 19 , 2025
Place: No. 382, Yuejiang Zhong Road, Guangzhou 510335.China
Booth: NO. 20.2 B25-26 C23-24
Nanxiang sincerely invites you to the Canton Fair! This exhibition will be held on October 15th at No. 382, Yuejiang Middle Road, Haizhu District, Guangzhou City, Guangdong Province. Our booth number is NO.20.2B25-26, C23-24. To ensure you complete the registration process smoothly, we recommend booking your visit to the exhibition in advance. We eagerly look forward to meeting you at the exhibition!
Brief Introduction of Exhibited Products
1. GHH Air End Screw Air Compressor
- HH-RAND Air end, imported technology with higher precision;
- Premium IP54 IE3 asynchronous motors & Super Premium IP55 IE4 motors
- Divided-type inverter MD-500 from INOVANCE；
- Double VSD system；
- 8000 hours of synthetic lubricating oil；
- IOT inside the PLC system；
- Schneider contactor；
- SKF bearings;
- Produce more free air delivery and have a longer service lifetime；
- Thermostat valve and differential pressure sensor are equipped；
2. Oil-free Screw Blower
Oil-free : Oil-free lubrication design, no oil contamination in output gas, suitable for food, pharmaceutical, electronics and other high-cleanliness scenarios, avoiding pollution risks.
Energy-saving ：Optimized rotor + frequency conversion control, adjusts power on demand, saves 20%-30% energy compared with ordinary blowers in long-term operation, reducing electricity costs and carbon emissions.
Low-noise Operation：Built-in sound insulation and shock absorption structure, operating noise ≤75dB, lower than traditional models, protecting personnel hearing and reducing surrounding interference.
Stable Operation：Wear-resistant and corrosion-resistant rotor + precise temperature/pressure control, designed service life over 10 years, 30% longer than ordinary models, reducing replacement costs.
3. 4-in-1 PM VSD Screw Air Compressor
4-in-1 integration：Integrates air compressor, dryer, filter and air tank; no separate purchase/assembly, reducing matching risks.
Space-saving：Integrated design saves over 40% space vs split-type, fit for workshops, labs with limited space.
One-click operation：Unified panel integrates functions; no separate parameter adjustment, easy for novices, reducing operation failures.
Fewer pipelines, lower maintenance：Over 70% fewer external pipelines; lower leakage/blockage risks, less maintenance, 30% cost savings long-term.
4. PM VSD Screw Air Compressor
Energy-saving & cost-reducing：Equipped with high-efficiency motor and frequency conversion tech, adjusts output on demand, saves 15%-25% energy vs traditional models, cutting electricity costs long-term.
Stable operation & low noise：Optimized internal structure reduces component friction, operating noise ≤80dB, lowers failure rate and ensures continuous work.
Easy maintenance & time-saving：Key parts easy to disassemble, daily maintenance needs no complex tools; with fault early warning, shortens maintenance time and reduces downtime loss.
High-quality gas & wide adaptation：Built-in precision filtration system, low dust and oil content in output gas, suitable for manufacturing, spraying, pneumatic tools and other scenarios.
Durable & long service life：Uses high-strength wear-resistant materials, with precise temperature control, slows component aging; designed service life up to 8-10 years.
5. Dual-System Dual-Pressure Screw Air Compressor
Precise Dual-Pressure Output：Dual-pressure (13bar/8bar) output, precisely matching the entire blow molding process (“low-pressure pre-treatment + high-pressure molding”), avoiding energy waste.
Independent Dual-System Control：Dual systems start/stop independently, no need for full-machine load; invalid energy consumption reduced by 30%+, saving electricity costs long-term.
Reliable Backup Operation：Dual systems back up each other; if one fails, the other continues working, reducing production line downtime risk and extending equipment life.
One Unit, Double Efficiency: 1 unit replaces 2 (high/low-pressure single units), simplifying workshop layout and reducing initial purchase, installation, and later maintenance costs.
Flexible Pressure Adjustment: Independent pressure adjustment adapts to multi-spec blow molding (capacity/material), no need to replace equipment, more flexible in responding to order changes.
Sales Contact
Michael Zhang
Tel: +8615270025538
Invitation
