Compresor de aire industrial de pistón
Compresor de aire industrial de pistón
- Presión nominal: 0.8-1.5 MPa
- Air Flow @ Outlet: 0.17 – 3.0 m³/min
- Poder: 1.5 – 18.5 kW, 2 – 25 hp
Features of the Industrial Piston Air Compressors
● Long life span: durable cast iron frame and cylinder, heavy duty steel base construction, GB compliant starter.
● The quality of the machine: single casting air-cooled cylinder, with central diffusion plate, improvement in heat exchange and efficiency.
● Light load start: automatic start/stop control via pressure switch.
● The machine is equipped with contemporary safety features: it offers standard low oil content limit switches, ensuring uninterrupted service.
● Highly reliable and continuous operation: industrial-grade lubrication oil ensures smooth and efficient operation, providing longer service life.
| Modelo | Potencia del motor (kW) | Flujo de aire (m³/min) | Presión de trabajo (Mpa) | Cylinder Diameter（mm） | Dimensión (mm) | peso (kg) |
|---|---|---|---|---|---|---|
| V-0.17/8 | 1.5 | 0.17 | 0.8 | 51*2 | 950*400*720 | 85 |
| V-0.25/8 | 2.2 | 0.25 | 0.8 | 65*2 | 1060*420*780 | 100 |
| W-0.36/8 | 3 | 0.36 | 0.8 | 65*3 | 1180*420*850 | 110 |
| V-0.36/8* | 3 | 0.36 | 0.8 | 75*2 | 1160*460*940 | 180 |
| V-0.6/8 | 4 | 0.6 | 0.8 | 90*2 | 1160*460*940 | 210 |
| V-0.67/8 | 5.5 | 0.67 | 0.8 | 95*2 | 1270*490*940 | 220 |
| W-1.0/8 | 7.5 | 1 | 0.8 | 95*3 | 1520*560*1220 | 300 |
| W-1.6/8* | 11 | 1.6 | 0.8 | 125*2110*1 | 1700*690*1000 | 420 |
| W-2.4/8* | 15 | 2.4 | 0.8 | 125*2110*1 | 1960*740*1320 | 540 |
| W-3.0/8* | 18.5/S1125 | 3 | 0.8 | 125*3 | 1960*800*1390 | 550 |
| V-0.3/12.5* | 3 | 0.3 | 1.25 | 95*1 75*1 | 1160*460*940 | 200 |
| V-0.4/12.5 | 4 | 0.4 | 1.25 | 95*1 75*1 | 1160*460*940 | 210 |
| W-0.6/12.5 | 5.5 | 0.6 | 1.25 | 95*2 75*1 | 1460*520*1050 | 290 |
| W-0.8/12.5 | 7.5 | 0.8 | 1.25 | 95*2 75*1 | 1480*530*1100 | 290 |
| V-1.05/12.5 | 7.5 | 1.05 | 1.25 | 105*2 55*2 | 1520*560*1160 | 330 |
| W-1.6/1.25* | 11 | 1.6 | 1.25 | 125*2 100*1 | 1700*690*1000 | 420 |
| W-2.2/12.5* | 15 | 2.2 | 1.25 | 125*2 100*1 | 1960*800*1390 | 550 |
Nota:
Observaciones sobre el número de modelo: “F” significa velocidad fija, “V” significa VSD. Debido a las posibles diferencias en las velocidades de rotación de los motores, los caudales de aire de velocidad fija representan el mínimo del rango (es decir, 30 kW, 8 bar, 5,67 m³/min), mientras que el VSD puede alcanzar el máximo a plena carga.
Voltaje estándar en 380 V (+/-101 TP3T), 50 Hz +/-21 TP3T y disponible para voltajes personalizados de 220/380/440/460 V/60 Hz.
En casos de altitudes elevadas, temperaturas extremas, humedad excesiva, exposición intensa al polvo o cualquier otro entorno operativo difícil, podemos ofrecer diseños de productos personalizados para satisfacer sus necesidades específicas. La personalización está disponible para adaptarse a sus requisitos únicos.
Core Component Highlights of the Industrial Piston Air Compressors
Cooling Copper
Adding a high-efficiency heat sink to copper can effectively reduce the temperature of its surrounding air.
Piston Ring
Piston rings are precision engineered components used in internal combustion engines. They create a seal between the piston and the cylinder wall, allowing for compression of the air-fuel mixture. The oil rings scrape excess oil off the cylinder walls and help to control the amount of oil that leaks into the combustion chamber, ensuring efficient lubrication and minimising wear on the valves and crank shaft.
Suction and Exhaust Valve
Suction and exhaust valves are made from imported Swedish-special valve steel, precision machined, ground, and stress relieved for optimal strength, ductility, and impact resistance at high temperatures.
Filtro de aire
Air filters are designed to effectively filter out harmful particulates from incoming air while providing excellent noise-reduction capabilities.
Culata
The cylinder head is a key component of an engine, as it houses the combustion chamber where air and fuel mix to create the power for the vehicle. It also features closely-packed air passages, which allow for good heat dissipation.
Connecting Rod
The connecting rod is an integral part of a compressor’s performance. It is precision machined, bored and kept within ideal design requirements for parallelism, ensuring that the compressor runs smoothly and balanced with minimal oil loss.
Cilindro
The internal diameter of the cylinder has been precisely machined and ground for maximum durability and wear resistance.
Bearing
High-quality imported bearings are used to ensure long-term durability and performance.
Cigüeñal
The crankshaft is forged with high-quality steel, has high strength, and the wear parts are all surface hardened for excellent wear resistance. It comes with balancing weights for less vibration.
Buscar
Todos los productos
Contáctenos
¿Busca la mejor solución de aire comprimido para su sector?
● Comparta sus requisitos para una evaluación por parte de expertos (asistencia multilingüe).
● Desarrollar soluciones personalizadas, teniendo en cuenta opciones como el nivel de IP, el extremo de aire y las piezas, el idioma de la pantalla, el control remoto, la apariencia, la adaptación al voltaje y la temperatura, etc.
● Comience la producción tras la confirmación del pedido (tiempo de producción estándar: 20-25 días).
● Realice rigurosas pruebas de calidad antes del envío.
● Asistencia técnica de por vida, asistencia con piezas de mantenimiento originales y hasta 10 años de garantía para el compresor.
Preguntas frecuentes
Do you support B2B customization as a piston air compressor manufacturer?
Yes. We can develop customized solutions based on your requirements, including IP level, air end and parts, screen language, remote control options, appearance, voltage, and temperature adaptation.
What makes your industrial piston air compressors durable for long-term use?
Our compressors use a cast iron frame, cast iron cylinders, a heavy-duty steel base, high-efficiency cooling components, and industrial-grade lubrication oil. These features support long service life and stable operation.
What is the standard production time for bulk orders?
After order confirmation, the standard production time is 20–25 days, followed by strict quality testing before shipping.
