Industrial Piston Air Compressor
Industrial Piston Air Compressor
- Rated Pressure: 0.8-1.5 MPa
- Air Flow @ Outlet: 0.17 – 3.0 m³/min
- Power: 1.5 – 18.5 kW, 2 – 25 hp
Features of the Industrial Piston Air Compressors
● Long life span: durable cast iron frame and cylinder, heavy duty steel base construction, GB compliant starter.
● The quality of the machine: single casting air-cooled cylinder, with central diffusion plate, improvement in heat exchange and efficiency.
● Light load start: automatic start/stop control via pressure switch.
● The machine is equipped with contemporary safety features: it offers standard low oil content limit switches, ensuring uninterrupted service.
● Highly reliable and continuous operation: industrial-grade lubrication oil ensures smooth and efficient operation, providing longer service life.
| Model | Motor Power（KW） | Air Flow（m³/min） | Working Pressure（Mpa） | Cylinder Diameter（mm） | Dimension（mm） | weight（kg） |
|---|---|---|---|---|---|---|
| V-0.17/8 | 1.5 | 0.17 | 0.8 | 51*2 | 950*400*720 | 85 |
| V-0.25/8 | 2.2 | 0.25 | 0.8 | 65*2 | 1060*420*780 | 100 |
| W-0.36/8 | 3 | 0.36 | 0.8 | 65*3 | 1180*420*850 | 110 |
| V-0.36/8* | 3 | 0.36 | 0.8 | 75*2 | 1160*460*940 | 180 |
| V-0.6/8 | 4 | 0.6 | 0.8 | 90*2 | 1160*460*940 | 210 |
| V-0.67/8 | 5.5 | 0.67 | 0.8 | 95*2 | 1270*490*940 | 220 |
| W-1.0/8 | 7.5 | 1 | 0.8 | 95*3 | 1520*560*1220 | 300 |
| W-1.6/8* | 11 | 1.6 | 0.8 | 125*2110*1 | 1700*690*1000 | 420 |
| W-2.4/8* | 15 | 2.4 | 0.8 | 125*2110*1 | 1960*740*1320 | 540 |
| W-3.0/8* | 18.5/S1125 | 3 | 0.8 | 125*3 | 1960*800*1390 | 550 |
| V-0.3/12.5* | 3 | 0.3 | 1.25 | 95*1 75*1 | 1160*460*940 | 200 |
| V-0.4/12.5 | 4 | 0.4 | 1.25 | 95*1 75*1 | 1160*460*940 | 210 |
| W-0.6/12.5 | 5.5 | 0.6 | 1.25 | 95*2 75*1 | 1460*520*1050 | 290 |
| W-0.8/12.5 | 7.5 | 0.8 | 1.25 | 95*2 75*1 | 1480*530*1100 | 290 |
| V-1.05/12.5 | 7.5 | 1.05 | 1.25 | 105*2 55*2 | 1520*560*1160 | 330 |
| W-1.6/1.25* | 11 | 1.6 | 1.25 | 125*2 100*1 | 1700*690*1000 | 420 |
| W-2.2/12.5* | 15 | 2.2 | 1.25 | 125*2 100*1 | 1960*800*1390 | 550 |
Note:
Model number remarks: “F” as fixed speed, “V” as VSD. Due to the potentially different rotation speeds of motors, the air flow rates of fixed speed represent the minimum in the range (i.e 30kW 8 bar 5.67m³/min), while VSD can reach the maximum at full loading.
Standard voltage in 380V (+/-10%), 50Hz +/-2% and available for customized voltage 220/380/440/460V/60Hz.
In cases of elevated altitudes, extreme temperatures, excessive humidity, heavy dust exposure, or any other challenging operational environments, we can offer tailored product designs to meet your specific needs. Customization is available to align with your unique requirements.
Core Component Highlights of the Industrial Piston Air Compressors
Cooling Copper
Adding a high-efficiency heat sink to copper can effectively reduce the temperature of its surrounding air.
Piston Ring
Piston rings are precision engineered components used in internal combustion engines. They create a seal between the piston and the cylinder wall, allowing for compression of the air-fuel mixture. The oil rings scrape excess oil off the cylinder walls and help to control the amount of oil that leaks into the combustion chamber, ensuring efficient lubrication and minimising wear on the valves and crank shaft.
Suction and Exhaust Valve
Suction and exhaust valves are made from imported Swedish-special valve steel, precision machined, ground, and stress relieved for optimal strength, ductility, and impact resistance at high temperatures.
Air Filter
Air filters are designed to effectively filter out harmful particulates from incoming air while providing excellent noise-reduction capabilities.
Cylinder Head
The cylinder head is a key component of an engine, as it houses the combustion chamber where air and fuel mix to create the power for the vehicle. It also features closely-packed air passages, which allow for good heat dissipation.
Connecting Rod
The connecting rod is an integral part of a compressor’s performance. It is precision machined, bored and kept within ideal design requirements for parallelism, ensuring that the compressor runs smoothly and balanced with minimal oil loss.
Cylinder
The internal diameter of the cylinder has been precisely machined and ground for maximum durability and wear resistance.
Bearing
High-quality imported bearings are used to ensure long-term durability and performance.
Crankshaft
The crankshaft is forged with high-quality steel, has high strength, and the wear parts are all surface hardened for excellent wear resistance. It comes with balancing weights for less vibration.
Search
All Product
Contact Us
Looking for the Best Compressed Air Solution for your industry?
● Share your requirements for expert evaluation (multilingual support).
● Develop customized solution, considering options such as IP level, air end and parts, screen language, remote control, appearance, voltage and temperature adaptation, etc.
● Start production after order confirmation (standard production time: 20-25 days).
● Conduct rigorous quality testing before shipping.
● Lifelong technical support, original maintenance parts support, and up to 10-year warranty on the air end.
Frequently Asked Questions
Do you support B2B customization as a piston air compressor manufacturer?
Yes. We can develop customized solutions based on your requirements, including IP level, air end and parts, screen language, remote control options, appearance, voltage, and temperature adaptation.
What makes your industrial piston air compressors durable for long-term use?
Our compressors use a cast iron frame, cast iron cylinders, a heavy-duty steel base, high-efficiency cooling components, and industrial-grade lubrication oil. These features support long service life and stable operation.
What is the standard production time for bulk orders?
After order confirmation, the standard production time is 20–25 days, followed by strict quality testing before shipping.
